Understanding Mold and Our Remediation Process

Mold Removal in Dallas

We provide Dallas homes and businesses needing mold remediation with a customized plan. Every property will generally go through the following process:

Step 1: Mold Inspection and Texas State Mold Law Classification

Under Texas Mold Law, mold can be classified in one of two ways. If we find mold during an inspection, we will document the growth size and determine if the remediation needs to be filed with the state.

Step 2: Containment Setup and HEPA Air Filtration Installation

Containment and HEPA Air Filtration helps keep mold spores from spreading to other parts of your Dallas property. We can install these two elements while we wait for mold remediation clearance from Texas.

Step 3: Mold Remediation

We remove the mold from your property.

Step 4: Mold Sealant and Reconstruction

We apply mold sealant to help prevent the resurgence of growth. If any part of your property was damaged, it will be rebuilt.

Step 5: Mold Clearance Certificate

This step is only needed when the mold was filed with Texas. Your property will be inspected by an independent third party and a certificate will be issued if mold remediation was completed properly.

Need Guidance? Free Mold Inspection

We're here to help. Contact Us, and let us know what's going on. We will set up a good time to inspect your property.

Texas Mold Removal Company in Dallas

Have Mold Related Questions? Call Us Today – (972) 986-7677

Understanding Mold

Microscopic mold spores exist naturally almost everywhere, indoors and outdoors, so removing all mold from a home or business is impossible. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air, and they may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. 
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise the mold may return.
  • Let your nose lead the way. Mold often produces a strong, musty odor, and can lead you to possible mold problem areas.
  • Even higher than normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

The Mold Remediation Process

Every mold damage scenario is different and requires a unique solution, but the general mold remediation process stays the same. The steps listed below illustrate our “typical” process:

  1. Emergency Contact - (972) 986-7677

The mold cleanup and restoration process begins when you call us. Our representative will ask a series of questions to help us determine the necessary equipment, resources, and personnel.

  1. Inspection and Mold Damage Assessment

Local and state laws may require a specific inspection and documentation protocol based on the size of the affected area. We can advise you on this process, providing guidance based on your unique situation.

We carefully inspect your property for visible signs of mold. Mold feeds on cellulose and water and can be hidden from plain view. We use various technologies to detect mold and hidden water sources.

  1. Mold Containment

Our professionals use various containment procedures to prevent the spread of mold. We may use advanced containment procedures like negative air chambers to isolate the contaminated area with physical barriers and negative air pressure to keep the mold spores from spreading during the cleanup process. All fans and heating and cooling systems will be turned off to prevent the spread of mold.

  1. Air Filtration

Our specialized filtration equipment allows our Professionals to capture microscopic mold spores out of the air. We utilize powerful “air scrubbers” and HEPA vacuums to prevent the spread of these mold spores while the mold remediation is in process.

  1. Removing Mold and Mold-Infested Materials

The mold remediation process depends on the amount of mold growth and the types of surfaces on which the mold appears. We’ll use antifungal and antimicrobial treatments to eliminate mold colonies and to help prevent new colonies from forming. It may be necessary to remove and dispose of mold-infested porous materials, like drywall and carpeting, to remediate heavy mold growth.

  1. Cleaning Contents and Belongings

We clean your furniture, decorative items, curtains, clothing, and other restorable items affected by mold. We use a variety of cleaning techniques to clean and disinfect your belongings. We’re also trained to remove odors and deodorization using fogging equipment.

  1. Restoration

Depending on the level of mold damage, drywall, subfloors, and other building materials may have been removed. Restoration may involve minor repairs, such as replacing drywall, painting, and installing new carpet; or it may entail major repairs such as the reconstruction of various areas or rooms in a home or business. The restoration step gets your home or business back to normal.

Visit our updated page